—- XQ-FF201 Epoxy Crack Sealing Adhesive in can pack

XQ-FF201 Epoxy Crack Sealing Adhesive in can pack

Features with high hardness, excellent Polish, strong adhesion, fast curing, easy to bond with the substrate such as concrete, stone, steel. Is a modified epoxy, initial adhesiveness.


Range of Application

Assorted with XQ-GF201 crack grouting adhesive when repairing concrete cracks,

Mainly used for crack sealing and base bonding during processing of repairing the concrete crack and grouting.

Used for steel bar planting at secondary structure part.

Sealing around the steel plate during steel wrap process

Repairing and leveling for the concrete surface



1, Modified epoxy resin, good initial adhesiveness;

2, Low temperature or room temperature curing, fast curing speed;

3, high adhesive strength after curing, good hardness and a certain toughness;

4, Good anti-acid after curing, good performance against moisture water, oil, dust,humidity and weather ageing

5, The cured products have good strength for tension, pressure and bonding


Product Performance

1  Main Performance

Testing project Condition Index
Gel Performance
Tensile Strength Under (23±2)℃、(50±5)%RH, tested by loading speed of 2mm/min ≥30 MPa
Tensile modulus of elasticity ≥1.5×103MPa
Elongation ≥1.5 %
Bending Strength ≥40 MPa
Compressive Strength ≥70 MPa
Bonding Capacity
Steel-Steel Tensile Shear Strength (23±2)℃、(50±5)%RH ≥10 MPa
Steel-Steel bonding tensile strength (23±2)℃ (50±5)%RH C30,Ф25,L=150mm ≥32 MPa
C60,Ф25,L=150mm ≤35 MPa
Steel-Steel T-peeling strength (23±2)℃、(50±5)%RH ≥2.5 mm (Concrete cohesion damage)
Steel to C45 Concrete cohesive pulling strength ≥14 MPa
Non-volatile content (105±2)℃、(180±5)min ≥99 %



Processing Flow:

Crack marking → Surface treatment → Embedding the injector → Sealing with adhesive → Sealing inspection → Mixing crack grouting adhesive → Low pressure injection → Hardening → Inspection


Packaging and Logistics

  1.  Two components in separate package, Mix ratio (weight) A:B=2:1
  2.  Shall be stored in cool (under 25℃), dry and ventilated place, not exceed 1 year.
  3.  Toxic free, non dangerous, can be shipped as normal chemical materials.
  4.  1kg/set (part A 0.66kgs, Part B 0.34kgs)



Shall be stored in a dry, ventilated place and away from fire, Avoid upside down, sun exposure, rain and collide with sharp things.

Must wear protective gloves, if accidentally touched by skin, please clean with acetone or alcohol, and washed by water, if accidentally splashed into the eyes rinse with plenty of water and seek immediate medical attention.

Mixing the adhesive averagely according to recommended ratio and used out within the effect period which is 60 mins under 25℃.