Looking for anchor adhesive factory direct sale? You can buy factory price anchor adhesive from the reliable China chemical anchor adhesive manufacturer, suppliers, pure epoxy anchor, injection anchor adhesive.
Pure Epoxy Anchor Mortar 20kgs/60kgs FixingChor 120/160
Bulk in Barrel
Rebar planting anchor adhesive
Adopted with modified epoxy resin, FixingChor 120/160 Anchoring Adhesive are two-component curing system under normal temperature, It has features of fast-curing, high strength, aging resistance, anti-acid and alkali, excellent fatigue resistance and so on, are widely used for steel, screw, anchor bolt and metal sectional materials which anchored and reinforced with concrete, rock and brick wall etc.
Range of Application
Steel bar embedding and anchor reinforcement with many building structures.
Anchoring of equipment Foundation
Anchor supporting for roof and wall of mine roadway
Anchoring for Water Conservancy facilities, docks, roads, bridges and other projects
Installation anchoring for curtain wall and chemical equipment, pipeline, billboards,etc.
Features:
1, Two component, fast curing at room temperature
2, Stress-free fixed with small edge spacing
3, Fast loading capacity to building structure with high adhesion, planting steel bar with embedding effect;
4 Suitable for concrete, stone, metal and other building material;
5, can be proceeded under -5~45℃ temperature conditions or with water. The processing is easy without flow, good technical performance.
6, high acid and alkali resistance, aging resistance, good thermal performance.
Product performance
1. Basic parameters
1) Appearance
Part A (main): white cream
Part B (hardener): black cream
2) Mixed Viscosity: 18-22Pa.s
3) Hardened density: 1.60±0.10g/cm3
4) Mixing Ratio: 3:1
5) Shelf time: 24 months
2 Main Performance
|
Testing project |
Condition |
Index |
|
|
Gel Performance |
|||
|
Splitting Tensile Strength |
Under (23±2)℃、(50±5)%RH, tested by loading speed of 2mm/min |
≥8.5 MPa |
|
|
Bending Strength |
≥50 MPa (no fragmental damage) |
||
|
Compressive Strength |
≥60 MPa |
||
|
Bonding Capacity |
|||
|
Steel-Steel Tensile Shear Strength |
≥10 MPa |
||
|
Bonding strength of Ribbed steel bar (or screw) with concrete under constrain drawing condition |
(23±2)℃ (50±5)%RH |
C30,Ф25,L=150mm |
≥11 MPa |
|
C60,Ф25,L=150mm |
≥17 MPa |
||
|
Steel-Steel T-peeling strength |
(23±2)℃、(50±5)%RH |
≤25 mm |
|
|
Non-volatile content |
(105±2)℃、(180±5)min |
≥99 % |
|
Remarks: all data are average.
Processing flow
Positioning→ Drilling → Cleaning → Assembling the gel → Bar Planting → Hardening
Operation and Harden time
|
|
|
||||
|
Temperarure ℃ |
-5 |
0 |
10 |
20 |
≥30 |
|
Operation time (min) |
60 |
45 |
30 |
25 |
20 |
|
Harden time (h) |
72 |
48 |
24 |
12 |
6 |
Packaging and Logistics
1. Two components in seperate plastic barrel, mixing rate 3:1 20kgs/set and 60kgs/set
2. Shall be stored in cool (under 25℃), dry and ventilated place, not exceed 1 year.
3. Toxic free, non dangerous, can be shipped as normal chemical materials.
Attention:
If touched by skin, please treated by using acetone in first and then washed by water.
Must wear glove, mask and other safety products.
Don’t use too much adhesives at each time.
