Matt and glossy surface, epoxy and polyaspartic resin materials.
Matte / Glossy Surface Tile Grout Epoxy Sealer ColorSeal 701
Tile Joint Sealant 1:1 400ml
Pure Epoxy
Description
This series is double component epoxy sealant made for Tile decoration, is a high technology product,
adopted with many kinds of imported nano polymer and high quality pigments. The materials meet National
Quality Standard GB18583-2008 (Indoor decorating and refurbishing materials-Limits of harmful substances
of adhesives). This sealant can cover the surface of the tile gaps, and make a protecting film like ceramics,
to resolve problems of dirt and difficulties of cleaning.
Features
1. Easily to handle, 1:1 injection, intelligence mixing, piston design for output;
2. Abrasion proof, high strength, waterproof, oil proof, dirty resistance, with good performance of self-cleaning,
3. Suitable for both wall and ground surface without any leak under any circumstance.
4. Earth-friendly, does not include any toxic, smell, formaldehyde and xylene etc.
5. Convenient and easy to handle, inject into the tile gap and clean with scraper or finger.
6. High decoration quality with rich and nature colors, glossy without fade.
Range of Application
Good choice for home decoration, building industry, hotel, hospital, etc. Especially for the decoration and repairs of ceramics, tiles, mosaic, windows, top surface of sanitary and the edge lines of toilet.
Tech Data Sheets
|
Classification Code |
Test Characteristics |
Classification Requirement |
|
RG (reaction resin grout) |
Abrasion resistance |
≤ 0.015 cu. in. (250 mm3) |
|
Flexural strength |
> 4,350 psi (30 MPa) |
|
|
Compressive strength |
> 6,525 psi (45 MPa) |
|
|
Shrinkage |
< 0.06 in./3.28 ft. (1,5 mm/m) |
|
|
Water absorption |
< 0.0002 lb. (0,1 g) |
|
|
R2 (reaction resin adhesive, improved) |
Shear adhesion strength |
≥ 2 N/mm² |
|
Shear adhesion strength after water immersion |
≥ 2 N/mm² |
|
|
Open time: tensile adhesion strength |
≥ 0,5 N/mm² after not less than 20 minutes |
|
|
Shear adhesion strength after thermal shock |
≥ 2 N/mm² |
|
Test Method |
Specification Standard |
Test Results |
|
water cleanability |
80 minutes |
Pass |
|
initial setting time |
> 2 hours |
Pass |
|
service setting time |
< 7 days |
Pass |
|
shrinkage |
< 0.25% |
Pass |
|
sag |
No change |
Pass |
|
quarry shear bond |
> 1,000 psi (6,90 MPa) |
Pass |
|
compressive strength |
> 3,500 psi (24,1 MPa) |
Pass |
|
tensile strength |
> 1,000 psi (6,90 MPa) |
Pass |
|
thermal shock |
> 500 psi (3,45 MPa) |
Pass |
Shelf Life and Product Characteristics (before mixing)
|
Shelf life |
1 years when stored in original, unopened packaging at 25°C |
|
Physical state |
Resin (Part A) and hardener (Part B) |
|
Colors |
Available in RAL colors. Sample color chips are available upon request. |
|
VOCs (Rule #1168 of California’s SCAQMD) |
8 g per L |
** Protect containers from freezing in transit and storage. Provide for heated storage on site and deliver all materials at least 24 hours before work begins.
Attention
1. Remove the first mixed sealant about 40cm
2. Keep the sealant in the mixer opening no longer than 20 minutes, to avoid hard to squeeze the sealant,
so make sufficient preparation in advance.
3. Gap width above 1.5mm, to make sure the under gap flat without dirts.
4. The sealant can be completely hardened after 12 hours, but can be longer if the temperature is low, so
it is normal if slow in winter.
5. If the sealant can not be used in one time, remember to clean the sealant in the mixer opening,
and recap to keep in cool place for 12 months, replace a new opening when reuse.
