Pure Epoxy Anchor Adhesive

Looking for anchor adhesive factory direct sale? You can buy factory price anchor adhesive from the reliable China chemical anchor adhesive manufacturer, suppliers, pure epoxy anchor, injection anchor adhesive.

360ml 5:1 Cartridge Type Pure Epoxy Chemical Anchoring FixingChor 136

360ml 5:1 Cartridge Type Pure Epoxy Chemical Anchoring&[more]

INQUIRE NOW

360ml 5:1 Cartridge Type Pure Epoxy Chemical Anchoring  FixingChor 136

360ml 5:1 High Tensile Strength Chemical Anchor Adhesive For Thread Rods

Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,

Chemical anchoring system used for anchoring and rebar connections in concrete.

 

Item #: FixingChor136

Capacity: 360ml

Materials: Epoxy

Mixing Ratio: 5:1

 

Product Description:

Adopted with modified epoxy resin and composite materials, FixingChor 136 Injection Anchoring Adhesive is a two-component, Styrene Free system for use as a high strength, non-shrink anchor grouting material. Its advantage on steel bar planting has been proved by many testimonies. Compares with other adhesive, it is a new high performance, Eco-friendly anchoring adhesive which has strong bonding strength and high efficiency as well as irritation free and low odor.

 

Advantages

1. High bonding strength, good flexible performance similar as embedded.

2. Ageing resistance, good heat tolerance and does not creep at ambient temperature;

3. Low sensitivity in moist condition with long term load stability;

4. acid-resistant, good shock resistance, stress-free fixed;

5. good thixotropy, particularly applicable to the sides or top surface anchoring;

6. two-cylinder direct-mix package, with a dedicated glue gun without manual mixing

 

Application:

·  All concrete building without embedded steel bar

·  Reinforcement and reconstruction of buildings with concrete

·  Reinforcement and reconstruction of Railway, Road, Bridge, Water resources, Tunnel, etc.

·  Reinforcement for equipment, pipeline installation, supports

    of curtain wall.

Technical Parameter:

1. Basic parameters 

   1) Appearence

     Part A (main): white cream

     Part B (hardener): red cream / grey cream

   2) Mixed Viscosity: 18-22Pa.s

   3) Hardened density: 1.50±0.10g/cm3

   4) Mixing ratio (Volume ratio): 5:1

   5) Shelf time: 24 months

 

2 Main Performance

Testing project

 Condition

 Index

Gel Performance (According to China National Standard GB50728-2011)

Splitting Tensile Strength (MPa)

Under (23±2)℃(50±5)%RH, tested by loading speed of 2mm/min

≥8.5

Flexural Strength (MPa)

≥50

 (no fragment damage)

Compressive Strength (MPa)

≥60

Bonding Capacity (According to China National Standard GB50728-2011)

Steel-Steel Tensile Shear Strength (MPa)

(23±2)(50±5)%RH

≥10

Bonding strength of Ribbed steel bar (or screw) with concrete under constrain drawing condition

(23±2)(50±5)%RH

C30,Ф25,L=150mm

≥11

C60,Ф25,L=150mm

≥17

Steel-Steel T-peeling strength (mm)

(23±2)℃(50±5)%RH

≤25

Non-volatile content

(105±2)℃(180±5)min

≥99%

Ageing resistance to heat and humidity  90d

Reduction rate of tensile strength

Under normal room temperature

≤12%

(According to China National Standard JGJ145-2013)

Tensile Strength  (after high temperature welding)

Dia12 Grade II steel, C30 concrete

Hole dia.16mm, Depth: 150mm

55.1N, 57.0N, 54.8N

 

3 Technical Data

Anchoring Adhesive used with thread rod

Thread Rod Dia

 

C30 Concrete

M10

M12

M16

M20

M24

Drilling Dia.(mm)

 

12

14

18

24

28

Depth (mm)

 

90

110

145

180

220

Damage Pulling force KN

Grade 5.8 Steel

29

42.2

78.5

122.5

254.5

Grade 8.8 Steel / A4 SS

36.8

52.9

94.1

147.0

211.7

Damage Cutting force KN

Grade 5.8 Steel

17.4

25.3

47.1

73.5

105.9

Grade 8.8 Steel

`27.8

40.5

75.3

117.6

169.4

A4 SS

24.4

35.4

65.9

102.9

105.9

Designed Pulling force KN

 

12.0

17.02

30.6

52.4

75.2

Designed Cutting Force KN

Grade 5.8 Steel

12.2

17.6

32.9

51.5

74.1

Grade 8.8 Steel

18.6

27.0

50.2

78.4

113.0

A4 SS

13.0

19.0

35.3

55.2

56.9

Holes for each

 

54

25

8

5

3

 

Anchoring Loading Capacity of rebar to C30 concrete (designed value KN)

 

Rebar d(mm)

10

12

14

16

18

20

22

25

28

30

32

Hole D(mm)

14

16

18

22

25

28

30

32

36

38

40

Bar planting depth (mm)

100

19.8

 

 

 

 

 

 

 

 

 

 

120

23.8

27.6

 

 

 

 

 

 

 

 

 

140

27.7

32.2

36.3

 

 

 

 

 

 

 

 

160

31.7

36.8

41.5

45.8

 

 

 

 

 

 

 

180

 

41.4

46.6

51.6

55

 

 

 

 

 

 

200

 

46.0

51.8

57.3

61.1

62.8

 

 

 

 

 

220

 

 

57.0

63.1

67.2

69.1

71.5

 

 

 

 

240

 

 

62.2

68.9

73.3

75.4

78

79.2

 

 

 

260

 

 

 

74.6

79.3

81.7

84.5

85.8

96.1

 

 

280

 

 

 

80.4

85.4

88.0

91.0

92.4

102.9

107.4

 

300

 

 

 

 

91.5

94.2

97.5

99

109.8

114.6

115.8

320

 

 

 

 

97.6

100.5

103.9

105.6

116.6

121.8

123

340

 

 

 

 

103.7

106.8

110.4

112.2

123.5

128.9

130

360

 

 

 

 

 

113.0

117.0

118.8

130.4

136.1

137.5

380

 

 

 

 

 

119.3

123.5

125.3

137.2

143.3

144.8

400

 

 

 

 

 

125.6

130

131.9

144.1

150.4

152

420

 

 

 

 

 

 

136.5

138.5

150.9

157.6

159.2

440

 

 

 

 

 

 

143

145.1

157.8

164.7

166.5

480

 

 

 

 

 

 

149.5

151.7

164.7

171.9

173.7

500

 

 

 

 

 

 

156

1583

171.5

179.1

181

550

 

 

 

 

 

 

 

164.9

188.7

197

199.1

600

 

 

 

 

 

 

 

181.4

205.8

214.8

217.1

650

 

 

 

 

 

 

 

197.9

223

232.7

235.2

700

 

 

 

 

 

 

 

 

240.1

250.6

253.2

750

 

 

 

 

 

 

 

 

257.3

268.5

271.5

800

 

 

 

 

 

 

 

 

 

286.4

289.6

850

 

 

 

 

 

 

 

 

 

 

307.7

anchoring length (mm)

147

149

178

210

250

300

351

446

538

592

666

steel yield (mm)

23.6

33.9

46.2

60.3

76.3

94.2

114

147.2

184.6

212.1

241.2

 

 

Actual Tensile Strength (KN)  

Grade II rebar fy=310 N/mm (designed), fy=310 N/mm (standard)

Concrete: C30

 

Rebar d(mm)

10

12

14

16

18

20

22

25

28

32

Hole D(mm)

14

16

18

22

25

28

30

32

36

40

Bar planting depth (mm)

100

30.3

 

 

 

 

 

 

 

 

 

120

36.7

38.5

 

 

 

 

 

 

 

 

140

42.2

47.5

53.1

 

 

 

 

 

 

 

160

 

58.8

62.7

68.9

 

 

 

 

 

 

180

 

63.5

73.3

80.5

90.1

 

 

 

 

 

200

 

68.5

80.7

95.2

106.7

120.7

 

 

 

 

240

 

 

89.5

102.4

122.6

137.6

140.7

 

 

 

260

 

 

 

118.7

137.6

152.4

166.8

168.5

 

 

280

 

 

 

 

149.7

168.7

180.2

192.7

200.2

 

300

 

 

 

 

 

183.5

200.7

218.5

231.7

 

280

 

 

 

 

 

 

210.6

241.7

260.5

250.5

300

 

 

 

 

 

 

220.9

265.5

298.8

280.7

340

 

 

 

 

 

 

 

277.7

327.7

330.2

380

 

 

 

 

 

 

 

285.6

356.7

370.7

420

 

 

 

 

 

 

 

 

 

342.2

460

 

 

 

 

 

 

 

 

 

400.1

500

 

 

 

 

 

 

 

 

 

427.7

540

 

 

 

 

 

 

 

 

 

447.2

580

 

 

 

 

 

 

 

 

 

466.5

steel yield depth (mm)

90

121

142

185

211

250

280

357

405

501

 

 

Processing Method 

1 Tools

·  Electric hammer

·  Hole cleaning brush

·  Air compressor

·  Glue gun

2  Attention

·  Drill as per requested hole dia. and depth

·  Clean the hole completely

·  Inject from the bottom of the hole and pull out the gun slowly.

·  After planting the bar, let the gel harden in still.

 

3. Processing Flow

 

 

Drilling: As per technical data

Cleaning: using pump or compressed air and brush to clean the hole completely.

Assembling and Injection: Mount the static mixer onto the bottle, push out some incomplete mixed gel at the front part,then inject from the bottom of the hole, to fill 1/2 to 2/3 depth of the hole.

Bar planting: spin slowly the bar or screw into the hole, adjust up and down for several times to make the gel average, but don’t touch it during hardening time.

Curing and Maintenance: According to the temperature of the base materials, give enough time to harden and start to load mounting until it hardened completely.   

 

Curing time:

 

Operation and Harden time

Temperarure 

-5

0

10

20

≥30

Operation time (min)

60

45

30

25

20

Harden time (h)

72

48

24

12

6

 

 

Consumption Chart  (holes per cartridge)

 

Anchor Rod dia.

M10

M12

M16

M20

M24

Drilling Dia.(mm)

12

14

18

24

28

Depth (mm)

90

110

145

180

220

Each usage

8ml

13ml

28ml

62ml

103ml

360ml

45

27

 

 

 

390ml

48

30

14

6

3

585ml

73

45

20

9

5

650ml

81

50

23

10

6

 

Packaging:

1. One cartridge with one mixer

2. 20pcs/30pcs per carton.

3. Xinchor label or your own label.

4. EXP Date on the top of cartridge.

5. Customized Packing.

Item No.

Mixing

Standard Pack/Set

Pcs/Ctn

Ctn Size (cm)

Ctn/Pallet

Pallets/ 20’FCL

Pallets/ 40’FCL

FixingChor 136

5:1

360ml+ 1mixer

20

27x27x27

60

10

20

FixingChor 139

3:1

390ml+ 1mixer

20

40x26x27

50

10

20

FixingChor 158

3:1

585ml + 1mixer

12

29×21.5×30

64

10

20

FixingChor 140

1:1

400ml+ 1mixer

30

49×30×26

40

10

20

FixingChor 165

1:1

650ml+ 1mixer

10

31.5×21×26

70

10

20

FixingChor 142

2:1

420ml + 1mixer

20

46x22x23

40

10

20

 

Shipping:

1. Shipments can be arranged by sea, air, courier express.

2. Courier express includes DHL, FedEx, TNT, UPS, EMS, SF, etc.

 

 

Send Products Inquiry to Us

To provide with better services, pleaser fill out the form below.

    Subject*

    Name*

    Email*

    Inquiry Items

    Leave Your Message*