U-Shape Hoop Introduction of Carbon Fiber Wrap for Beam Reinforcement Projects

U-shaped hoops are anchoring measures often used in the bending reinforcement of carbon fiber cloth in concrete beams. The U-hoop does not act directly on the bottom of the beam, but is pasted on the carbon fiber cloth at the bottom of the beam and on the side of the beam body. U-hoops play an important role in carbon fiber cloth reinforcement.

U-Shape Hoop Introduction of Carbon Fiber Wrap for Beam Reinforcement Projects

Now CFRP carbon fiber fabric reinforcement is more and more popular, carbon fiber wrap reinforcement technology can strengthen and repair structures, applied to building beams, columns, floor structure reinforcement. Carbon fiber cloth as a new type of material, its primary advantage is reflected in the good tensile properties, the toughness of its material is also very large, strong tensile strength makes the reinforcement operation smoother, smoother, easier to paste.

 


U-shaped hoops are anchoring measures often used in the bending reinforcement of carbon fiber cloth in concrete beams. The U-hoop does not act directly on the bottom of the beam, but is pasted on the carbon fiber cloth at the bottom of the beam and on the side of the beam body. U-hoops play an important role in carbon fiber cloth reinforcement.


The beam body is pasted with A-shaped hoops, which can effectively anchor the carbon fiber cloth at the bottom of the beam. Numerous tests and practical projects have proved that the reinforcement beam body with reasonable U-shaped hoop arrangement shows good ductility when bearing higher loads. The anchoring effect of the U-shaped hoop ensures that the carbon fiber cloth works together with the beam body, which plays a significant role in inhibiting the occurrence of peeling damage.




U-shaped hoops have different layout ranges, widths, spacing and other requirements for different reinforcement needs. In the reinforcement of the bent structure, such as the beam body, considering the different forces, there are different arrangement bases and layout forms for the positive section and the oblique section, and the U-shaped hoops that we often see are pasted within the length range of the beam body, which is generally the arrangement form taken to consider the oblique section reinforcement.



Contact Us

For we can provide you a better service, please fill in all * fields below.

    Subject*

    Name*

    Email*

    Inquiry Items

    Leave Your Message*